Main public logs

Combined display of all available logs of Drywall Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

11:39, 5 January 2026 Jlebeau81 talk contribs created page Bazooka (Created page with "<h2>Drywall Bazooka</h2>aka "automatic taping tool" that simultaneously applies joint compound (mud) and drywall tape to seams and corners, significantly speeding up the drywall finishing process compared to taping by hand. It works by loading a roll of paper tape and pumping mud into its internal tube; as you run the tool along a joint, it dispenses the mud onto the seam, lays the tape over it, and has a cutter for the tape, making the process much faster and safer.")
11:37, 5 January 2026 Jlebeau81 talk contribs created page Pan Knife (Created page with "<h2>Pan Knife</h2>aka a "Drywall Taping Knife" is a separate tool used to spread joint compound onto drywall. They come in 4", 5", 6", 8", 10", 12", and 14" A taping knife or joint knife is a drywall tool with a wide blade for spreading joint compound, also known as "mud". It can be used to spread mud over nail and screw indents in new drywall applications and is also used when using paper or fiberglass drywall tape to cover seams. Other common uses include patching hole...")
11:33, 5 January 2026 Jlebeau81 talk contribs created page Pan Knive (Created page with "<h2>Pan Knive</h2>")
11:32, 5 January 2026 Jlebeau81 talk contribs created page Drywall Hawk (Created page with "<h2>Drywall Hawk</h2> is a flat, square board with a perpendicular handle underneath, used as a portable surface to hold and carry joint compound (mud) or plaster, allowing a tradesperson to apply it smoothly to walls with a trowel. It functions like a mini-workbench, keeping mud handy for continuous application, especially for texturing or larger plaster jobs, though it's less common in basic drywall taping where pans and knives are often preferred")
11:30, 5 January 2026 Jlebeau81 talk contribs created page Hawk (Created page with " <h2>drywall hawk</h2> is a flat, square board with a perpendicular handle underneath, used as a portable surface to hold and carry joint compound (mud) or plaster, allowing a tradesperson to apply it smoothly to walls with a trowel. It functions like a mini-workbench, keeping mud handy for continuous application, especially for texturing or larger plaster jobs, though it's less common in basic drywall taping where pans and knives are often preferred")
11:28, 5 January 2026 Jlebeau81 talk contribs created page Drywall Taping Knife (Created page with "<h2>Drywall Taping Knife</h2> is a separate tool used to spread joint compound onto drywall. They come in 4", 5", 6", 8", 10", 12", and 14" A taping knife or joint knife is a drywall tool with a wide blade for spreading joint compound, also known as "mud". It can be used to spread mud over nail and screw indents in new drywall applications and is also used when using paper or fiberglass drywall tape to cover seams. Other common uses include patching holes, smoothing wall...")
11:22, 5 January 2026 Jlebeau81 talk contribs created page Blade Knive (Created page with "<h2>Drywall Knife</h2> aka "utility knife" also includes small folding-, retractable- and/or replaceable-blade knives suited for use in the general workplace or in the construction industry. The latter type is sometimes generically called a Stanley knife, after a prominent brand designed by the American tool manufacturing company Stanley Works (subsequently merged into Stanley Black & Decker).")
11:20, 5 January 2026 Jlebeau81 talk contribs created page T Square (Created page with " <h2>Drywall T-squares</h2> are also used in various industries, such as construction. For example, drywall T-squares are typically made of aluminum and have a 48-inch-long (120 cm) tongue, allowing them to be used for measuring and cutting drywall. In woodworking, higher-end table saws often have T-square fences attached to a rail on the front side of the table, providing improved accuracy and precision when cutting wood.")
11:14, 5 January 2026 Jlebeau81 talk contribs created page Steel Stud (Created page with "<h2>Metal Stud aka 'Steel Stud'</h2>is a lightweight, C-shaped or U-shaped framing component, typically made from galvanized steel, used in construction for building interior walls, ceilings, and partitions, offering advantages like fire resistance, pest control, and dimensional stability compared to wood framing, especially in commercial buildings and moisture-prone areas")
11:13, 5 January 2026 Jlebeau81 talk contribs created page Type X Drywall (Created page with "<h2>Type X Drywall</h2> is a fire-rated gypsum wallboard reinforced with glass fibers in its core, making it stronger and more resistant to fire than standard drywall, often used in assemblies requiring 1-hour fire ratings for walls between garages and living spaces, or in commercial settings, and is typically 5/8-inch thick. It provides crucial fire protection by maintaining structural integrity longer under intense heat, allowing time for escape, but it is heavier and...")
11:12, 5 January 2026 Jlebeau81 talk contribs created page 5/8 drywall (Created page with "<h2>5/8-inch Drywall</h2> is a thicker, denser gypsum board, often labeled as Type X, known for superior fire resistance (offering a 1-hour barrier), better sound dampening, increased durability, and greater rigidity, making it ideal for ceilings with 24-inch joist spacing, garage walls, home theaters, and commercial projects, though it's heavier and more costly than standard 1/2-inch drywall.")
11:10, 5 January 2026 Jlebeau81 talk contribs created page Moisture Resistant Drywall (Created page with "<h2>Moisture-resistant drywall</h2> (like "green board" or "purple board") is a gypsum panel with a water-repellent coating or fiberglass mat, designed to slow moisture absorption and inhibit mold growth in humid indoor areas like bathrooms, kitchens, and basements, but it's not waterproof and shouldn't be used in tub surrounds; it's for damp conditions, not direct water exposure.")
11:08, 5 January 2026 Jlebeau81 talk contribs created page Green Board (Created page with " <h2>green board</h2> is a type of moisture-resistant drywall with a green paper facing, used in high-humidity areas like bathrooms and kitchens to resist mold and mildew, though it's not fully waterproof and is distinct from traditional chalkboards or modern digital boards. It's a gypsum-based panel with waxy additives, making it more durable against water than standard drywall but not suitable for areas with direct water contact, like shower stalls.")
11:07, 5 January 2026 Jlebeau81 talk contribs created page California Patch (Created page with "<h2>California patch</h2> is a popular, backing-free drywall repair method for small to medium holes (up to about a foot), where you create a paper-backed patch from a spare drywall piece, leaving paper "wings" that get mudded and blended into the wall for a seamless, invisible fix without needing wood supports. Also called a butterfly patch, it's favored for its simplicity and effectiveness in creating smooth, durable repairs by "feathering" the mud over the paper edges...")
11:06, 5 January 2026 Jlebeau81 talk contribs created page Drywall Patch (Created page with "A drywall patch is a material or technique used to repair holes, dents, or damage in drywall (wallboard), ranging from small dings with spackle to larger holes using a new piece of drywall, mesh tape, and joint compound, often employing methods like the "California Patch" for seamless, strong repairs that blend with the wall. <h2>Types of Patches & Materials:</h2> #Spackle: For tiny holes or dents. #Mesh/Fiberglass Patches: Self-adhesive screens that cover holes (up to...")
05:15, 5 January 2026 Jlebeau81 talk contribs created page No-Coat (Created page with " No-Coat or NoCoat is a product that is made with plastic covered in paper for inside and outside corners. Available in 100ft rolls and sticks 8ft, 9ft, 10ft, and 12ft. Benefits are a better bond to the drywall and better ability not to dent when impacted. It is glued on with joint compound instead of nailed or screwed like corner bead. "No-Coat" refers to an innovative drywall corner system with a strong copolymer core and paper tape, designed for durable, crack-resista...")
05:11, 5 January 2026 Jlebeau81 talk contribs created page Sheetrock (Created page with "Sheetrock is a popular brand name for drywall (also called gypsum board or wallboard), which are large panels made of a gypsum plaster core sandwiched between paper, used to create smooth interior walls and ceilings in construction, known for being affordable, easy to install, and available in various types like moisture-resistant or fire-rated for specific needs. <h2>What it is</h2> A gypsum-based panel, meaning it's made from calcium sulfate dihydrate (gypsum) mixed...")
05:09, 5 January 2026 Jlebeau81 talk contribs created page Gypsum (Created page with "Gypsum is a soft sulfate mineral (CaSO₄·2H₂O) mined globally, primarily used for making drywall (plasterboard) and plaster, but also as a soil conditioner for calcium and sulfur, in cement, and for decorative items like alabaster and selenite crystals. It forms from evaporated seawater, often with salt deposits, and its commercial forms include fire-resistant Type X drywall and Plaster of Paris (bassanite), a dehydrated form used in construction and arts.")
23:37, 3 January 2026 Jlebeau81 talk contribs created page Drywall Lift (Created page with "Tool that is used to lift sheets of drywall up to the ceiling and hold it in place while the sheet is screwed in place. Allows a single worker to hang drywall on the ceiling. The design was created by Telapro but since the copyright has expired and many companies now make them.")
23:35, 3 January 2026 Jlebeau81 talk contribs created page Drywall Hopper (Created page with "This is a tool that holds drywall texture and sprays it. It is fed by gravity and powered by an air compressor. Usual pressure is between 20-60 psi. The hopper usually has multiple tip sizes to get different styles of texture. Source: Jason Lebeau is a 24 year veteran of the drywall industry")
23:32, 3 January 2026 Jlebeau81 talk contribs created page Orange Peel (Created page with "This is a texture created from spraying joint compound from a drywall hopper powered by an air compressor. The joint compound is thinned with water. Source: Jason Lebeau is a 24 year veteran of the drywall industry")
23:29, 3 January 2026 Jlebeau81 talk contribs created page Drywall Texture (Created page with "Drywall Texture is a texture applied to drywall after the taping and finishing is done. Examples are Popcorn, Knockdown, Orange Peel, Sand, Stomp and Drag, Crows Foot Ect... Knockdown texture is the only texture currently popular in the USA the rest have faded as modern styles prefer smooth ceilings.")
07:14, 1 January 2026 Jlebeau81 talk contribs created page Knockdown Texture (Created page with "A drywall texture that is created by adding water to joint compound to thin it and then spraying through a drywall spray hopper powered by an air compressor onto the ceiling or wall. After a short time the finisher comes back and flattens out the globs of joint compound with a special lexan blade giving a modern desirable appearance. Most popular in Southern USA and Western USA not as common in the Northeast where smooth is preferred. Source: Jason Lebeau, a 24 year dry...")
07:09, 1 January 2026 Jlebeau81 talk contribs created page Seam (Created page with "When the recessed ends of two drywall sheets come together. The recess is there to allow room to hide the tape. The bevel is filled with joint compound after the first taping coat.")
07:07, 1 January 2026 Jlebeau81 talk contribs created page Butt Joint (Created page with "When shorter end of 2 sheets of drywall come together. This side doesn't have a taper so its harder to finish and must be feathered out wider than seams which are recessed or indented to give room to hide the tape. Source: Jason Lebeau, a 24 year drywall industry veteran.")
07:02, 1 January 2026 Jlebeau81 talk contribs created page Popcorn Texture (Created page with "The product that was spray applied to drywall ceilings until around 2002. **Caution** In homes up to 1978-1980 the product contained asbestos. Never scrape in an older home unless you get it tested first. Best to drywall over in older homes. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:59, 1 January 2026 Jlebeau81 talk contribs created page No Coat (Created page with "Product that is made with plastic covered in paper for inside and outside corners. Available in 100ft rolls and sticks 8ft, 9ft, 10ft, and 12ft. Benefits are a better bond to the drywall and better ability not to dent when impacted. It is glued on with joint compound instead of nailed or screwed like corner bead. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:55, 1 January 2026 Jlebeau81 talk contribs created page Corner Bead (Created page with "The metal or vinyl pieces that are applied to outside corners to make a nice straight line and a finish that is not going to easily chip off. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:54, 1 January 2026 Jlebeau81 talk contribs created page Joint Compound (Created page with "Joint Compound is the gypsum based product that is used to tape and finish drywall. Examples are USG green lid all purpose. Blue or lime lid USG Lightweight.Also setting type joint compound is powder in bags "durabond" or "sandable" is a product that hardens by chemical reaction like plaster or concrete does when mixed with water. The number on the bag is the number of minutes until it hardens. available times are 5 minute,20 minute, 45 minute,90 minute, 220 minute. So...")
06:47, 1 January 2026 Jlebeau81 talk contribs created page Sanding (Created page with "The process of sanding the joint compound to make it smooth and feathered in with the drywall paper. Large power sanders are often used with 9" circular pads and a HEPA vacuum that sucks up the dust. Grits used are 120-240. 220-240 suggested for lightweight joint compound(Blue or lime colored lid), 120 grit for all purpose heavy weight joint compound such as darker green lid USG. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:43, 1 January 2026 Jlebeau81 talk contribs created page Drywall screw (Created page with "Special screw made to attach drywall to wood studs or steel studs. They come in various lengths and coarse thread for wood, fine thread for steel studs.If going into steel studs gauge 20 or thicker a self tapping variant is required.")
06:40, 1 January 2026 Jlebeau81 talk contribs created page Flat Box (Created page with "Drywall Finishing tool designed to coat the seams and butt joints with joint compound. A handle is also attached with a brake lever that holds the box at a specific angle to the wall or ceiling. Popular companies making them include: Level 5 Tools, Columbia, Tape Tech, Dewalt. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:26, 1 January 2026 Jlebeau81 talk contribs created page Level Five Finish (Created page with "This when the level 4 finish is complete and then the finishers apply 1-2 skim coats over the entire surface of the drywall. It is good for high light areas, and areas where critical lighting or shiny paint finishes are called for. Only about 5% of drywall is finished to a level 5 finish. It is considered premium. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:23, 1 January 2026 Jlebeau81 talk contribs created page Level four finish (Created page with "This is when the taping coat and two additional coats are applied to all areas, and then everything is sanded smooth and blended and feathered in. This is the standard finish and would be considered "ready for paint" at this point. Around 95% of drywall stops at level 4 and is painted and considered done. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:20, 1 January 2026 Jlebeau81 talk contribs created page Finish Coat (Created page with "Drywall Finish Coat is the third and usually final coat where a tight skim coat is applied to all areas previously coated such as the seams, screws, corner beads, butt joints, and inside corners. This would constitute a level 3 Finish under the 1-5 levels of finish. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:17, 1 January 2026 Jlebeau81 talk contribs created page Second Coat (Created page with "Drywall Second Coat is the process of covering all the drywall tape with joint compound and filling in the beveled seams. Corner bead and screws also receive another coat over the first one. This would constitute a level 2 or 3 finish under the 1-5 finishing levels. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:15, 1 January 2026 Jlebeau81 talk contribs created page First Coat (Created page with "First Coat is the process of embedding the drywall tape into joint compound and wiping the excess compound from under the tape. The process glues the tape half on each board making a structural connection between the two boards and preventing cracks from forming. This coat also constitutes a level 1 finish under the 1-5 finishing levels system. Tapes are either paper or fiberglass. Source: Jason Lebeau a 24 year drywall industry veteran.")
06:09, 1 January 2026 Jlebeau81 talk contribs created page Drywall (Created page with "Drywall (also called plasterboard, dry lining,[1] wallboard, sheet rock, gib board, gypsum board, buster board, turtles board, slap board, custard board, gypsum panel and gyprock) is a panel made of calcium sulfate dihydrate (gypsum), with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction of interior walls and ceilings.[2] The plaster is mixed with fiber (typically paper, glass wool, or a combination of thes...")
05:56, 1 January 2026 Jlebeau81 talk contribs created page MrWalls Drywall & Paint (Created page with "MrWalls Drywall & Painting When it comes to drywall installation, repair, or resurfacing, Mrwalls Drywall & Painting stands out as the premier choice for homeowners seeking quality, reliability, and personalized service. As a fully licensed and insured company, we provide peace of mind that your project will be done correctly and beyond all industry standards. With 23 years of experience in the business, our expertise ensures that every job, big or small, is completed...")
05:55, 1 January 2026 Jlebeau81 talk contribs created page MrWalls Drywall & Painting (Created page with "MrWalls Drywall & Painting When it comes to drywall installation, repair, or resurfacing, Mrwalls Drywall & Painting stands out as the premier choice for homeowners seeking quality, reliability, and personalized service. As a fully licensed and insured company, we provide peace of mind that your project will be done correctly and beyond all industry standards. With 23 years of experience in the business, our expertise ensures that every job, big or small, is completed...")
05:54, 1 January 2026 Jlebeau81 talk contribs created page MrWalls Drywall and painting (Created page with "MrWalls Drywall & Painting When it comes to drywall installation, repair, or resurfacing, Mrwalls Drywall & Painting stands out as the premier choice for homeowners seeking quality, reliability, and personalized service. As a fully licensed and insured company, we provide peace of mind that your project will be done correctly and beyond all industry standards. With 23 years of experience in the business, our expertise ensures that every job, big or small, is completed...")
05:54, 1 January 2026 Jlebeau81 talk contribs created page MrWalls Drywall (Created page with "MrWalls Drywall & Painting When it comes to drywall installation, repair, or resurfacing, Mrwalls Drywall & Painting stands out as the premier choice for homeowners seeking quality, reliability, and personalized service. As a fully licensed and insured company, we provide peace of mind that your project will be done correctly and beyond all industry standards. With 23 years of experience in the business, our expertise ensures that every job, big or small, is completed...")
05:50, 1 January 2026 Jlebeau81 talk contribs created page Mrwalls (Created page with "MrWalls Drywall & Painting When it comes to drywall installation, repair, or resurfacing, Mrwalls Drywall & Painting stands out as the premier choice for homeowners seeking quality, reliability, and personalized service. As a fully licensed and insured company, we provide peace of mind that your project will be done correctly and beyond all industry standards. With 23 years of experience in the business, our expertise ensures that every job, big or small, is completed...")
05:01, 1 January 2026 Jlebeau81 talk contribs created page Drywall Stilts (Created page with "Drywall stilts are adjustable, leg-worn platforms used by construction workers to reach high walls and ceilings for tasks like hanging, taping, and finishing drywall, allowing them to work without ladders, increasing efficiency, and reducing fatigue by providing stability and height for smoother movement and longer work spans. They feature large, stable footplates, spring-loaded action for natural movement, and adjustable heights, differing from circus stilts by prioriti...")
05:00, 1 January 2026 Jlebeau81 talk contribs created page Drywall Trowl (Created page with "The drywall trowel evolved from ancient plastering tools, initially simple wood/stone blades, becoming specialized metal versions for lath & plaster systems in the 19th century, then adapted by painters into larger knives, and finally refined with stainless steel and ergonomic designs for modern drywall finishing, becoming a distinct tool as drywall replaced plaster after WWII for faster construction. Key developments include the rise of companies like Marshalltown, inco...")
04:55, 1 January 2026 Jlebeau81 talk contribs created page Drywall Finishing Process (Created page with "Drywall finishing techniques (also called taping and mudding) involve applying joint compound ("mud") and tape to hide seams, screws, and corners after hanging, creating a smooth surface for painting. Professionals use hand tools for small jobs or automatic tools for speed on large projects. The process typically requires 3 coats, drying time (often overnight), and sanding between coats. Step-by-Step Basic Hand Finishing Process Preparation Install corner bead on outsid...")
04:53, 1 January 2026 Jlebeau81 talk contribs created page Drywall Hanging Process (Created page with "The drywall hanging process (also called sheetrock or gypsum board installation) involves attaching large panels to the framed walls and ceilings. Professionals prioritize efficiency, minimize seams, and ensure secure fastening—ceilings come first to support wall panels. Step-by-Step Process Preparation and Planning Review blueprints, gather materials (typically 4x8 or 4x12 ft panels, 1/2-inch thick for walls, 5/8-inch for ceilings in some cases), and ensure the frami...")
04:51, 1 January 2026 Jlebeau81 talk contribs created page Framing Carpenter (Created page with "A framing carpenter (also known as a rough carpenter or framer) is a construction trade professional who builds the structural skeleton of buildings using wood (or sometimes metal) framing. They create the framework that supports walls, floors, and roofs, providing the "bones" of a structure before insulation, drywall, electrical, plumbing, and finishes are added. This role comes before drywall hanging in the construction sequence—the framer erects the studs, joists, a...")
04:49, 1 January 2026 Jlebeau81 talk contribs created page Drywall Hanger (Created page with "A drywall hanger (also known as a drywall installer or sheetrock hanger) is a construction trade professional who specializes in measuring, cutting, and securely attaching drywall panels (also called gypsum board or sheetrock) to the wooden or metal framing (studs, joists) of walls and ceilings in buildings. This role typically comes before the drywall finisher's work—the hanger installs the raw panels, leaving visible seams, screws, and edges that the finisher then ta...")
04:47, 1 January 2026 Jlebeau81 talk contribs created page Drywall Finisher (Created page with "A drywall finisher (also known as a drywall taper or taper) is a skilled construction trade professional who specializes in preparing installed drywall panels for painting or other final decorations. Their primary role is to create smooth, seamless walls and ceilings by concealing joints, screws/nails, and imperfections after the drywall has been hung (typically by a separate drywall hanger or installer). Key Responsibilities Applying joint tape over seams between drywa...")